Selected for 1994 Volkswagen Corrado. Front: 195/50VR15 · Rear: 195/50VR15
Tire & Wheel Fitment
Factory Specs
Tire Sizes
Front Tire
195/50VR15
38 PSI
Rear Tire
195/50VR15
33 PSI
Wheel Specifications
Bolt Pattern
4x100
Center Bore
Data not provided
Offset (ET)
35mm
Torque & Lugs
Lug Torque
Data not provided
Thread Size
N/A
Technical Research
Engine
Type
I4
Power
134 hp
Fuel
Petrol
Generation
Name
53L
Years
1988 - 1995
Markets
EUDM
✓
Safety Features
Quick FAQ
Frequently Asked Questions
Common questions about 1994 Volkswagen Corrado fitment.
The standard factory tire size for the 1994 Volkswagen Corrado is 195/50VR15. Some trims may offer staggered setups or optional 18-20" wheels, so confirm the trim-specific size shown above.
Recommended tire pressure is 38 PSI front and 33 PSI rear for the 1994 Volkswagen Corrado. Always verify against the door-jamb placard for your exact trim, load, and wheel size.
The bolt pattern is 4x100—4 lugs with a 100mm pitch circle diameter. Match this exactly when buying wheels.
Center bore depends on the wheel package. Check the specs above or your wheel’s stamping and use hub-centric rings if needed.
You can typically stay within about +3% overall diameter of 195/50VR15 to avoid rubbing and speedometer issues. Always account for wheel width and offset, and test clearance at full lock and over bumps.
Follow the manufacturer torque spec (often 80-110 ft-lbs for many passenger vehicles) and re-check after 50-100 miles. Check the manual or dealer if unsure.