Selected for 2024 Porsche Panamera. Front: 265/45ZR19 · Rear: 295/40ZR19
Tire & Wheel Fitment
Factory Specs
Tire Sizes
Front Tire
265/45ZR19
35 PSI
Rear Tire
295/40ZR19
36 PSI
Wheel Specifications
Bolt Pattern
5x130
Center Bore
Data not provided
Offset (ET)
64mm
Torque & Lugs
Lug Torque
Data not provided
Thread Size
N/A
Technical Research
Engine
Code
MCS.ZA
Type
V6 2.9L
Power
443 hp
Fuel
Petrol
Generation
Name
G2 (971) Facelift
Years
2020 - 2024
Markets
CDM, USDM
✓
Safety Features
✓ ABS
✓ Stability Control
✓ Backup Camera
✓ Blind Spot Warning
Quick FAQ
Frequently Asked Questions
Common questions about 2024 Porsche Panamera fitment.
The standard factory tire size for the 2024 Porsche Panamera is 265/45ZR19. Some trims may offer staggered setups or optional 18-20" wheels, so confirm the trim-specific size shown above.
Recommended tire pressure is 35 PSI front and 36 PSI rear for the 2024 Porsche Panamera. Always verify against the door-jamb placard for your exact trim, load, and wheel size.
The bolt pattern is 5x130—5 lugs with a 130mm pitch circle diameter. Match this exactly when buying wheels.
Center bore depends on the wheel package. Check the specs above or your wheel’s stamping and use hub-centric rings if needed.
You can typically stay within about +3% overall diameter of 265/45ZR19 to avoid rubbing and speedometer issues. Always account for wheel width and offset, and test clearance at full lock and over bumps.
Follow the manufacturer torque spec (often 80-110 ft-lbs for many passenger vehicles) and re-check after 50-100 miles. Check the manual or dealer if unsure.